Etoposide-Loaded Poly(Lactic-co-Glycolic Acid) Intravitreal Implants: In Vitro and In Vivo Evaluation.

Etoposide-loaded poly(lactic-co-glycolic acid) implants were developed for intravitreal application. Implants were prepared by a solvent-casting method and characterized in terms of content uniformity, morphology, drug-polymer interaction, stability, and sterility. In vitro drug release was investigated and the implant degradation was monitored by the percent of mass loss. Implants were inserted into the vitreous cavity of rabbits' eye and the in vivo etoposide release profile was determined. Clinical examination and the Hen Egg Test-Chorioallantoic Membrane (HET-CAM) method were performed to evaluate the implant tolerance. The original chemical structure of the etoposide was preserved after incorporation in the polymeric matrix, which the drug was dispersed uniformly. In vitro, implants promoted sustained release of the drug and approximately 57% of the etoposide was released in 50 days. In vivo, devices released approximately 63% of the loaded drug in 42 days. Ophthalmic examination and HET-CAM assay revealed no evidence of toxic effects of implants. These results tend to show that etoposide-loaded implants could be potentially useful as an intraocular etoposide delivery system in the future.

Development and evaluation of sustained-release etoposide-loaded poly(ε-caprolactone) implants.

Poly(ε-caprolactone) implants containing etoposide, an important chemotherapeutic agent and topoisomerase II inhibitor, were fabricated by a melt method and characterized in terms of content uniformity, morphology, drug physical state, and sterility. In vitro and in vivo drug release from the implants was also evaluated. The cytotoxic activity of implants against HeLa cells was studied. The short-term tolerance of the implants was investigated after subcutaneous implantation in mice. The original chemical structure of etoposide was preserved after incorporation into the polymeric matrix, in which the drug was dispersed uniformly. Etoposide was present in crystalline form in the polymeric implant. In vitro release study showed prolonged and controlled release of etoposide, which showed cytotoxicity activity against HeLa cells. After implantation, good correlation between in vitro and in vivo drug release was found. The implants demonstrated good short-term tolerance in mice. These results tend to show that etoposide-loaded implants could be potentially applied as a local etoposide delivery system.

Development of agar diffusion method for dosage of gramicidin / Desenvolvimento do método de difusão em agar para dosagem de gramicidina

Gramicidin, an antimicrobial peptide active against Gram positive bacteria, is commonly used in pharmaceutical preparations for topical use. Considering that only the turbidimetric method has been described in the literature, the present study sought to develop and validate an agar diffusion method for the dosage of gramicidin. The method was developed and validated using the Kocuria rhizophila ATCC 9341 as a test microorganism. Two designs were used: a 3x3 parallel-line model, and a 5x1 standard curve. The validation demonstrated that the method follows the linear model (r²= 0.994), presenting a significant regression between the zone diameter of growth inhibition and the logarithm of the concentration within the range of 5 to 25.3 µg/mL. The results obtained for both designs were precise, having a relative standard deviation (R.S.D.) for intra-day precision of 0.81 for the 3x3 assay and 1.90 for the 5x1 assay. For the inter-day precision, the R.S.D. was 1.35 for the 3x3 and 2.64 for the 5x1. The accuracy was verified and results confirmed to be accurate, having a tolerance interval of 95 percent, which lay within permitted limits and appropriate trueness. In addition, the method was considered selective, with limit of detection and upper and lower limits of quantification of 2.00, 5.00 and 25.3 µg/mL, respectively. No difference in precision between the designs used in the agar diffusion method was evident (p>0.05). The method proved to be appropriate for the microbiological dosage of the raw material gramicidin.

A gramicidina, um peptídeo antimicrobiano ativo contra bactérias Gram positivo, é utilizada em preparações farmacêuticas de uso tópico. Neste trabalho procurou-se desenvolver e validar outro método para o doseamento de gramicidina tendo em vista que somente o método turbidimétrico é descrito. O método de difusão em ágar foi desenvolvido e validado utilizando como microrganismo teste Kocuria rhizophila ATCC 9341. Foram utilizados dois delineamentos: retas paralelas 3x3 e curva padrão 5x1. A validação demonstrou que o método segue o modelo linear (r²= 0,994) havendo regressão significativa entre o diâmetro dos halos de inibição e o logaritmo da concentração na faixa de 5,00 a 25,3 µg/mL. Os resultados obtidos por ambos os delineamentos foram precisos apresentando desvio padrão relativo (DPR) para precisão intra-dia de 0,81 para ensaio 3x3 e de 1,90 para ensaio 5x1. Para a precisão inter-dias o DPR foi de 1,35 para 3x3 e de 2,64 para 5x1. A exatidão foi verificada e os resultados foram exatos apresentando intervalo de tolerância a 95 por cento dentro dos limites permitidos e veracidade adequada. O método foi seletivo com limites de detecção e quantificação inferior e superior iguais a 2,00, 5,00 e 25,3 µg/mL, respectivamente. Não foi observada diferença entre a precisão dos delineamentos empregados no método de difusão em ágar (p>0.05). O método se mostrou adequado para a dosagem microbiológica de gramicidina matéria-prima.

Investigation of fatty acid esters to replace isopropyl myristate in the sterility test for ophthalmic ointments.

Several pharmacopoeias recommend the membrane filtration method for the sterility test of ophthalmic ointments. Isopropyl myristate, a fatty acid ester that exhibits high toxicity mainly against Gram-negative microorganisms, is indicated as a solvent for ointments. In this study, six fatty acid esters (diethyl adipate, diisopropyl adipate, ethyl laurate, ethyl myristate, methyl caprylate and isopropyl palmitate) were evaluated as solvents to replace isopropyl myristate in the sterility test for ophthalmic ointments. The logarithm of the partition coefficient (logP) of the fatty acid esters was calculated from the sum of the substituent hydrophobicity constants (pi) of the functional groups present in their molecules. The ability of the solvents to dissolve an ophthalmic ointment base was investigated. The D-value method was used to assess the antimicrobial activity of isopropyl palmitate, ethyl myristate, ethyl laurate and isopropyl myristate against Pseudomonas aeruginosa. Isopropyl palmitate was the least toxic solvent to this microorganism, since it had the highest D-value (171.1 min). No significant difference was observed between the D-values of ethyl myristate (89.4 min) and isopropyl myristate (92.5 min). Ethyl laurate exhibited the lowest D-value (27.2 min). Using gas chromatography coupled to mass spectrometry, other fatty acid esters were detected as the predominant impurities in the solvents, as well as acid contaminants in low or insignificant amounts.